Electric Rope Shovels

<p>Cat® Electric Rope Shovels are built specifically for removing large amounts of overburden and ore, at a fraction of the cost per ton.</p>


No hammers. No crowbars. No contest. Cat Advansys tips and adapters improve jobsite safety, performance and reliability, with hammerless installation.

7295 Product Brochure

Safety

Operator Cab

Reliability & Durability

Efficiency & Productivity

Ground Engaging Tools & Wire Rope

Technology

Serviceability

Sustainability

Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. Our smallest rope shovel, the Cat 7295 has a payload of 45 tonnes (50 tons) — about half the payload of our flagship 7495. But like its larger counterpart, the 7295 features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. The 7295 is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.

THE ULTIMATE IN  EFFICIENCY AND  RELIABILITY

Dependent on application and material density.

These weights will vary slightly depending upon dipper and optional equipment selection.

All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

Ground bearing pressure is dependent upon many factors.

Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.

A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.

Optimal working ranges based on loading a Cat® 785D truck.

*All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

Automatic, single-line system for open gear lubricant and grease.

6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.

Other voltages available to suit customer requirements.

One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Using power efficiently, producing zero direct carbon emissions and regenerating power back to the grid

Reducing  Environmental  Impact

With fast swing times, excellent visibility and wide-set boom point sheaves

Efficient Loading

With proven AC IGBT Electric Drive System that is streamlined, simple and easy to maintain

Leader in Reliability  and Uptime

Cat Electric Rope Shovels Moodsetter Video

Cat® Electric Rope Shovels: Loading Methods

Exterior Spin Set

360° Exterior View (HTML)

interior-spinset

360° Interior View (HTML)

7295 Electric Rope Shovel

7395 Product Brochure

Reliability At Work

All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Optimal working ranges based on loading a Cat® 793F truck.

*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

7395 Electric Rope Shovel

7495 HD Product Brochure

Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. The Cat 7495 HD is a smaller, tougher version of the 7495. Like the 7495, it features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. The 7495 HD is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.

THE ULTIMATE IN EFFICIENCY AND RELIABILITY

All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.

*All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.

Other voltage options available to suit customer requirements.

High impact ropes available as an option.

Reducing Environmental Impact

With fast swing times, improved line-of-sight, wide-set boom point sheaves and LatchFree Dipper design

Leader in Reliability and Uptime

7495 HD Electric Rope Shovel

7495 HD

7495 Product Brochure

Complete 7495 Electric Rope Shovel with HydraCrowd Product Brochure

Operator Productivity

Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. The Cat 7495 with HydraCrowd features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. The state-of-the-art operator’s cab is the most comfortable and productivity-enhancing in the industry. The 7495 is available with a number of new technologies that provide operator assist and machine self-protection, enable proactive maintenance, and deliver real-time information on productivity and performance. An entirely electric machine, the 7495 is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.

The Ultimate in Efficiency and Reliability

Dependent on application and material density

These weights will vary slightly depending upon dipper and optional equipment selection

All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

Ground bearing pressure is dependent upon many factors

Automatic, single-line system for open gear lubricant and grease

Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room

Other voltage options available to suit customer requirements

HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.

(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Optimal working ranges based on loading a Cat 795F AC truck.

*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

Reduces poor digging practices, enables consistent operator performance and provides equal or better cycle times

Efficiency-Boosting Operator Assist Technology

7495 Virtual Product Tour

7495 With HydraCrowd

7495 Electric Rope Shovel with Rope Crowd Product Brochure

Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. The Cat 7495 with Rope Crowd features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. The state-of-the-art operator’s cab is the most comfortable and productivity-enhancing in the industry. The 7495 with Rope Crowd is available with a number of new technologies that provide operator assist and machine self-protection, enable proactive maintenance, and deliver real-time information on productivity and performance. An entirely electric machine, the 7495 is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.

Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.

Optimal working ranges based on loading a Cat 797F truck.

Products

Parts & Support

Technology

Company

Careers

Electric Rope Shovels

7295 Electric Rope Shovel

7295

7395 Electric Rope Shovel

7395

7495 HD Electric Rope Shovel

7495 HD

7495 Electric Rope Shovel

7495 with HydraCrowd

7495 Electric Rope Shovel

7495 with Rope Crowd

20% OFF GENERAL DUTY UNDERCARRIAGE

Sign up to our newsletter

Products

Parts & Support

Technology

Company

Careers