Please note that sampling procedural guides can be found in the 'S.O.S Tips & Tools’ section.
Below is a list of part numbers available from William Adams that may assist with your S.O.S program.
A box of 10 standard S.O.S kits. See SOS003 for contents of each individual kit.
SOS002 also includes 3 Express Post Parcel bags. Up to 3 canisters can be placed into each Reply Paid bag for delivery to our laboratory. Individual Reply Paid canisters can also be placed directly into Australia Post mail boxes.
Our standard individual S.O.S Kit, including sample bottle, tubing, S.O.S card and pre-paid postage canister (simply place the addressed canister into any Australia Post mailbox).
The adaptor screws directly onto your sample bottle, allowing samples to be taken directly from a live sampling valve straight into the bottle. The adaptor must be flushed clean with the oil being sampled before every new sample.
- 1U-5718 S.O.S Vacuum Pump:
Used for the Vacuum Extraction Method for sampling. The pump is re-usable, though new tubing should be used for each sample.
Clean and trouble free solution to cutting sampling tube. 1U-8589 replacement blades are also available.
The Probe Holder fits over the sampling probe and tube. The textured surface provides grip for easy sampling from a live sampling valve. 162-8873 includes only one holder. The image shows a second probe holder installed onto the tube and probe for demonstration purposes only.
- 177-9343 Cap & Probe Group:
The Cap & Probe Group holds the sampling tube inside the bottle during sampling. The screw cap ensures no dirt or debris enters the bottle whilst the sample is being taken. Single use.
- Sampling Valves: For sampling from pressurised compartments such as engine, hydraulic and transmissions. William Adams service departments can assist with retrofit of these valves onto compartments if required.
8C-3446 ( 7/16” – 20 – ext. thread )
7X-3387 ( 1/4 “ – 18 NPTF – ext. thread )
8C-3345 ( M10 x 1 – ext. thread )
The dust caps protect live sampling valves from dirt dust and damage.
8C-3445 (Engine)
8C-3447 (Transmission)
8C-3451 (Hydraulic)
6V-0852 (Blank)
Below is a selection of towel and wiper options available through William Adams Parts.
These are great for using during S.O.S sampling and general clean-up in workshops.
DRC (Double Re-creped)Towels
- Ideal for messy clean-ups plus greater absorbency than cloth rag.
- Excellent wet-to-dry tensile strength so will not fall apart.
- Economic alternative to cloth and are lint-free
- Available in a variety of packages, including centre-pull rolls (a is selection shown below)
162-5791 Shop Towel
- Excellent absorbency and perfect for grease and oil
- Low -lint polypropylene construction
267-6535 & 267-6536 Hydroknit Rags
- Clean up oil, grime and solvents
- Highly absorbent
- Good for applying thinner and solvents
- Reinforced for heavy maintenance wiping
- Low lint and no residue
2265-2256 Low-lint task wipers
- For lab environments or where low-lint option is critical
- Ideal for cleaning critical components like fuel systems etc.
Dispensers are also available for various towel and wiper options. Ask our Parts Interpreters about dispensers to suit.